Wind Farm Riemst-Herderen is a wind farm located in Belgium completed in 2017. The project consists of thee turbines with a hub height of 141,5 m and a rotor diameter of 117 m. The rated power per turbine is 3,3 MW and the rated total power is 9,9 MW. The turbines have been provided by Vestas. Further details are mentioned below.Hub height: 141,5 mIEX: 2ANumber of turbines: 3Rated power per turbine: 3,3 MWTurbine supplier: VestasType: Onshore TurbineTip height: 200 mRotor diameter: 117 mRated power total: 9,9 MW

Wind Farm Hoogezandse Polder is a wind farm located in The Netherlands completed in 2017. The project consists of nine turbines with a hub height of 116,5 m and a rotor diameter of 117 m. The rated power per turbine is 3 MW and the rated total power is 27 MW. The turbines have been provided by Vestas. Further details are mentioned below.Hub height: 116,5 mIEX: 2ANumber of turbines: 9Rated power per turbine: 3 MWTurbine supplier: VestasType: Onshore TurbineTip height: 175 mRotor diameter: 117 mRated power total: 27 MW

In February 2008 the Water and Electricity Company Aruba ("WEB") requested for proposals to "build, own and operate" wind farm Vader Piet and to supply all related electricity to WEB. The Vader Piet wind farm consists of 10 turbines of the Vestas V90 type with a hub height of 105 metres and a rotor diameter of 90 metres . The foundations consist of circular concrete bases with a diameter of 13 metres, which are anchored in the limestone rock. The 24 GEWI anchors have a steel diameter of 63 mm and are drilled into the rock to a depth of 10 metres (drill diameters of 200 mm). Several test anchors were installed to examine the behaviour and bearing capacity of this rock. Due to its high capacity, it was possible to strongly reduce the size of the foundation bases. The sub soil was also subjected to plate bearing tests. Based on the test results, an inspection programme was performed. In total, the Vader Piet wind farm produces 20% of Aruba’s total electricity needs.The rated power per turbine is 3 MW and the rated total power is 3 MW. The turbines have been provided by Vestas. Further details are mentioned below.Hub height: 105 mIEX: 2ANumber of turbines: 10Rated power per turbine: 3 MWTurbine supplier: VestasType: Onshore TurbineTip height: 150 mRotor diameter: 90 mRated power total: 30 MW

Two existing wind farms in Curacao at Tera Korá, 12 turbines installed in 1992, and Playa Kanoa, 18 turbines installed in 1999, were replaced by 10 turbines of the 3 MW class. On behalf of NuCapital, ABT was involved as engineers and for the foundation design. The new wind turbines have a hub height of 80 metres and a rotor diameter of 90 metres. The project was executed in a very short period between May 2010 and December 2010, almost 5 months shorter than usual.

Wind Farm Oostpolderdijk is a wind farm located in The Netherlands completed in 2021. The project consists of 3 turbines with a hub height of 98 m and a rotor diameter of 100 m. The rated power per turbine is 2.5 MW and the rated total power is 7.5 MW. The turbines have been provided by Lagerwey. Further details are mentioned below.Hub height: 98 mIEC: Number of turbines: 3Rated power per turbine: 2.5 MWTurbine supplier: LagerweyType: Onshore TurbineTip height: 148 mRotor diameter: 100 mRated power total: 7.5 MW

At one of the locations of Wind farm Geefsweer, turbine maintenance had to be performed. The crane that had to be applied, however, differed from the crane on which the original design is based. Windbase came up with solutions to make this type of crane applicable on the already constructed hardstands.